Elements of ventilation systems Silencers, deflectors, etc.

Flexible inserts of heat-resistant GW are designed to be installed in the smoke removal system next to the fan to reduce vibration.

D 200, 250, 315, 400, 500, 630 et al .

• Flexible inserts are heat-resistant GW. Technical description.

---

Silencers are used in duct systems to reduce the noise level in the system due to the large surface area and coating of noise-absorbing material.

D 100, 125, 160, 200, 250, 315, 400, 500 et al .

• Silencers. Technical description.

---

Exhaust umbrellas are designed for cooling, cleaning and subsequent removal of hot air, odor and smoke generated as a result of the operation of thermal equipment

A 555, 630, 710, 805, 915, 1045, 1185 and others .

• Exhaust umbrellas. Technical description.

---

The passage nodes are designed to install steel ventilation exhaust shafts on them in systems with mechanical and natural ventilation of premises.

D 100, 125, 140, 160, 180, 200, 225, 250, 280, 315, 355 and others .

• Passage nodes. Technical description.

---

Deflectors are designed to enhance traction under the influence of wind and are used in natural ventilation systems to remove exhaust air.

D 100, 125, 140, 160, 180, 200, 225, 250, 280, 315, 355 et al .

• Deflectors. Technical description.

---

Active deflectors are rotating outdoor deflectors that, thanks to the wind, pull the exhaust air out of the room. They use wind energy to accelerate the movement of air in the ventilation system.

TV-160, 200, 250, 300, 315, 355, 400, 500, 630 et al .

• Active deflectors. Technical description.

---

Static pressure chambers are designed to equalize and distribute the air velocity in the ventilation system, including its supply to ventilated rooms.

---

Hermetic doors ensure high tightness and do not allow polluted air to enter the chamber in order to avoid malfunctions of the equipment located inside the chamber.

Ds 1255/505, Ds 905/405, DUs 1255/505, DUs 905/405, etc.

• The doors are sealed. Technical description.

---

Nozzles with a drainage ring are designed for the accumulation and withdrawal of atmospheric precipitation. Inside the structure there is a rain plate - a cone for collecting precipitation with an exhaust pipe that removes accumulated moisture.

NVK-100, 125, 160, 180, 200, 225, 250, 280, 315, 355 et al .

• Nozzles with a drainage ring. Technical description.

---

Mounting cups are designed for installation and installation of fans on the roof of the building. Round mounting cups are a welded construction made of black cold-rolled steel with connecting flanges that have special holes for installing fans and support consoles.

D 434, 534, 714, 970, 1170, etc.

• Mounting glasses. Technical description.

---